Ultra-compact introductory machine
| Coating method | Direct coat (2-roll) |
|---|---|
| Roll width | 150㎜ |
| Drying oven | 300㎜～500mm（hot air type） |
| Power supply | AC100V / 20A |
| Dimensions | W1200 X D900 X H1200 |
| Weight | 950kg |
Specifications
- With digital clearance display
- With rewinding and winding device
Option
- Roll mixer（50 mm units）
- Far infrared heater
- Automatic liquid supply device（Tank volume: 12 L）
- Solvent recovery tower（activated carbon system）
- enclosure（transparent resin）
- Air purge
Direct coater
| Coating method | Direct coat |
|---|---|
| Coating head | Replaceable type |
| Roll width | 200ｍｍ～500ｍｍ（50 mm units） |
| Drying oven | 800ｍｍX1 oven（hot air type） |
| Power supply | AC200V / 50A |
| Dimensions | W2000 X D1200 X H1800 |
| Weight | 1600kg |
Specifications
- With digital clearance display
- Out-feed (nip roll) mounting
Options
- Roll width（50 mm units）
- EPC
- Tension controller
- Supplemental drying ovens (up to 4 ovens)
- Far infrared heater
- Die head（replaceable）
- Gravure head（replaceable）
High-performance precision 3-roll coater
| Coating method | Direct coat・Transfer type coat (intermittent application) |
|---|---|
| Coating head | Replaceable type |
| Roll width | 250ｍｍ～500ｍｍ（50 mm units） |
| Drying oven | 1000ｍｍX2 ovens（hot air type） |
| Power supply | AC200V / 60A |
| Dimensions | W2700 X D1300 X H1900 |
| Weight | 1800kg |
Specifications
- With digital clearance display
- Out-feed (nip roll) mounting
Options
- Gas detector
- Ionizer
- Automatic liquid supply device (Tank volume: 11 L)
- Contact thickness gauge (2 locations: left, center, and right)
- enclosure (transparent resin)
- Simple explosion-proof（Air purge）
- Solvent recovery tower
- Drying oven（up to 4 ovens）
High-performance precision 3-roll coater
| Coating method | Direct coat・Transfer type coat (intermittent application) |
|---|---|
| Coating head | Replaceable type |
| Roll width | 350ｍｍ～600ｍｍ（50 mm units） |
| Drying oven | 1000ｍｍX1～4 oven（hot air type） |
| Power supply | AC200V / 100A |
| Dimensions | W5200 X D1800 X H2100 |
| Weight | 2000kg |
Specifications
- With digital clearance display
- In-feed (nip roll) mounting
- Out-feed (nip roll)
- Tension controller（Rewinding）
- Tension controller（Winding）
Options
- Roll width（50 mm units）
- Supplemental drying ovens（1000ｍｍX up to 4 ovens）
- Drying oven（Far infrared 1 oven）
- enclosure（transparent resin）
- enclosure （1 oven）
- Air purge
- Gas detector
- Automatic liquid supply device (Tank volume: 11 L)
- Contact thickness gauge (2 locations: left, center, and right)
- Non-contact type thickness gauge(3 locations: left, center, and right)
- Solvent recovery tower
This machine is a device that collects solvent from the drying exhaust air and atmosphere of coating equipment, and consists of a tower, a blower, and a chiller.
This method is called a heat exchange method, in which the exhaust air or the air around the house is rapidly cooled in a tower, and the air and solvent are separated. The following mechanisms will be installed to ensure safe operation.
It is equipped with a UPS and includes the main unit (drying oven), but even if it stops, only the exhaust mechanism for collection etc. will continue to operate for a few minutes.
| Processing air volume | 19m/min (MAX) with variable mechanism |
|---|---|
| Temperature | MAX 200℃ |
| Recovery capacity | 500g/10 minutes |
| Required flow rate | 10 liters/min to 20 liters/min |
| Inlet water temperature | around 10℃ |
| Drainage water temperature | MAX 15℃ |
| Collection tower material | SUS304 φ800 |
| Recovery tower blower | High heat type turbo fan 0.75KW |
| Safety mechanism | If this solvent recovery tower is not operating, the drying path will not be turned on. |
